Trane RT-SVX38C-EN, Инструкция по установке, эксплуатации и обслуживанию

Страница: 42 / 48

Troubleshooting
42 RT-SVX38C-EN
Resetting Cooling and Ignition
Lockouts
Cooling failures and ignition lockouts are reset in an
identical manner. Method 1 explains resetting the system
from the space; Method 2 explains resetting the system at
the unit.
Resetting Lockouts—Method 1
To reset the system from the space, turn the “Mode”
selection switch at the thermostat to the OFF position.
After approximately 30 seconds, turn the “Mode”
selection switch to the desired mode,e.g., Heat, Cool, or
Auto.
Resetting Lockouts—Method 2
To reset the system at the unit, cycle the unit power by
turning the disconnect switch to OFF and then to ON.