Trane Purifier Plus Purge Скачать руководство пользователя страница 5

PRG-IOM-3E

5

About this Manual

The Purifier Plus™ purge emission collection canister is designed to be 
installed in the exhaust line of a Trane Purifier Purge. The canister contains 
activated carbon which “filters” the refrigerant from the purge exhaust and 
holds it for recovery at a later date. Proper application of a Trane Purifier 
Purge and a Purifier Plus collection canister can result in “near zero” refriger-
ant emissions due to the purging of non-condensable from low pressure 
chillers.

The Purifier Plus canisters can be used effectively for chillers operating on 
CFC-11, CFC-113 and HCFC-123. When the carbon is saturated, the canis-
ter must be removed and returned for regeneration. During regeneration the 
refrigerant is extracted from the carbon and recycled. The canisters are 
cleaned and tested to insure proper performance and made available for 
reuse.

Note: 

The Purifier Plus can only be used with Trane Model PRGA, PRGB 

and PRGC Purifier Purges. Use with other purges may result in a potential 
safety hazard and/or damage to the purge due to partial restriction of the 
purge exhaust.

Receiving

Upon receipt of the unit, inspect the shipping carton for signs of visible dam-
age. Report any damage to the carrier.

Store unit in a dry, secure place prior to its installation and use.

Carefully remove the collection canister from the shipping containers. 
Inspect it for signs of visible shipping damage. If any damage is found, report 
it to the freight company immediately. Confirm all loose items shipped with 
the collection canister have been received. Do not install or operate a dam-
aged unit. 

The Purifier Plus is sold in two configurations:

Purifier Plus Kit (required for initial installation)

• (1) Purifier Plus Canister
• (1) Holding bracket
• (2) Mounting brackets and hardware
• (1) PRG-IOM-3E

Purifier Plus Replacement Canister (For Exchanged Cylinders)

• (1) Regenerated Purifier Plus Canister
• (1) Return shipping package and shipping instructions
• (1) PRG-IOM-3E/Data Sheet

General Information

Use tank ONLY on specified 

refrigerants having low pressure. 

Failure to do so may result in 

personal injury or death.

WARNING

!

Содержание Purifier Plus Purge














Отзывы: