6
SVU-MCXA_GB-EX (R410A)
Wireless Remote Control
COOL Mode
- Press Mode button to select the
operation mode.
- “COOL” will be shown on the display
when COOL mode is selected.
- Press either or button to set the
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto –> Low –> Medium –> High
A
Auto, Low, Medium, and High
respectively
DRY Mode
- Press Mode button to select the
operation mode.
- “DRY” will be shown on the display
when DRY mode is selected.
- Press either or button to set the
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto –> Low –> Medium –> High
A
Auto, Low, Medium, and High
respectively
Note:
•
In DRY mode, if the compressor stops
working, fan motor and SWEEP
function will be stopped; fan motor and
SWEEP function will operate when
compressor operates.
•
SWEEP function will be cancelled
whenever LOUVER function is selected.
•
ECONO mode cannot be activated
during DRY mode operation.
HEAT Mode
- Press Mode button to select the
operation mode.
-
will be shown on the display when
HEAT mode is selected.
- Press either or button to set the
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto –> Low –> Medium –> High
A
Auto, Low, Medium, and High
respectively
AUTO Mode
- Press Mode button to select the
operation mode.
-
will be shown on the display when
AUTO mode is selected.
- Press either or button to set the
desired temperature between 15ºC to
30ºC.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto –> Low –> Medium –> High
A
Auto, Low, Medium, and High
respectively
Note:
•
In AUTO mode, the system will
automatically switch between COOL
mode and HEAT mode to maintain
equally room temperature and set
temperature.
CLOCK Setting
- Press CLOCK button to set clock and
will be shown on the display with
blinking hour number.
- Press either or button to set the
clock to the present hour.
- Press CLOCK button again to confirm
hour setting and minute number will be
blinking.
- Press either or button to set the
clock to the present minute.
- Press CLOCK button again to confirm
minute setting; hour and minute
number will stop blinking and the set
time will be shown on the display.
Note:
•
If there are no other buttons pressed
within 15 seconds, clock setting will be
cancelled.
4. Transmission Indicator
The transmission indicator lights when
remote control transmits signal to the
indoor unit.
5. SLEEP Mode
Display sleep symbol after activating
SLEEP mode.
6. Set Temperature
Displays the set temperature (15ºC to
30ºC) when FAN or POWERCOOL
mode is selected. The set temperature
will be disappeared until FAN or
POWERCOOL mode is cancelled or
complete.
7. FAN Speed
Display the selected fan speed level:
auto, low, medium, or high.
8. Operation Mode
Displays the current operation mode:
FAN, COOL, or DRY in cooling only
system.
9. SWEEP Function
Displays “SW” when sweep motor is
activated.
10. ECONO Mode
Displays “ECONO” when ECONO
mode is activated.
11. POWERCOOL Mode
Displays “POWERCOOL” when
POWERCOOL mode is activated.
Operation Mode
FAN Mode
- Press Mode button to select the
operation mode.
- “FAN” will be shown on the display
when FAN mode is selected.
- Press FAN SPEED button to select the
desired fan speed level and the display
will show.
Auto –> Low –> Medium –> High
A
Auto, Low, Medium, and High
respectively
Note:
•
In FAN mode, the LCD display will not
show set temperature and cannot
adjust set temperature, SLEEP,
ECONO, and POWERCOOL mode.
SVU-MCXA_GB-EX (R410A).indd
21/11/2017, 11:27 AM
6
