17
48663983 Rev 1
Contents
2.4.2.3. Dry Mode
1. Press MODE to select dry mode, see ‘DRY’ shown on display
(Refer Figure - 10).
In dry mode default set temperature is 25°C.
Set temperature and fan speed cannot be changed.
Unit will operate at low fan speed for maximum moisture removal.
In high humidity conditions, user can select dry mode.
2.4.2.4. Fan Mode
1. Press MODE to select fan mode, see ‘FAN’ shown on display.
Set point temperature cannot be adjustable.
Fan speed can be adjustable.
2.4.2.5. Sleep Mode
1. Press to activate sleep mode operation.
The ‘set’ temperature will automatically increase by 1°C for each
hour for four hours.
After 4 hours unit will stay at latest temperature. E.g., if the
set temperature is 24°C and sleep mode is started. After
fi
rst hour
set temperature will increase to 25°C and at the end of fourth hour
set temperature will be at 28°C. The unit will stay at 28°C.
Press again to disable sleep mode.
Set point temperature and fan speed can be adjustable.
2.4.2.6. Turbo Mode
1. Press to activate turbo mode. See ‘TURBO’ on remote display.
Enables instant cooling by automatically adjusting fan speed to
turbo level.
Fan speed cannot be changed while unit is in turbo mode.
The display will show Turbo Speed 5 Bars (Refer Figure - 13).
User can set this mode for fast cooling.
Press again to disable turbo mode.
2.4.2.7. Fan speed
1. Press fan speed to change fan speed.
Fan speed can be changed as below
Low
Medium
High
Auto
Fan speed is adjusted automatically according to set point and
room temperature when FAN speed is set to AUTO mode.
e
Display
Figure - 10
1
1
e
Display
Figure - 11
1
Display
Figure - 12
e
1
Display
Figure - 13
e
Display
Figure - 14
e
1
