6
Installer’s Guide
3d. 2/4YC** and 4DC** Units
230 Volt 2/4YC** & 4DC** Single Phase units
WITHOUT Start Kit & 230/460 Volt Three Phase 2/
4YC** & 4DC** units except 460 Volt 2/
4YC*3060A4, & 460 Volt 4YCZ6 units
Note:
Use the Universal Bracket shipped in the Low
Ambient kit. Mount the Control Module to the Universal
Bracket as needed so that the assembly matches the
illustration below.
1.
Mount the Control Module and Universal Bracket
assembly to the bottom of the control box with two
(2) sheetmetal screws. One is inserted horizontally
from inside the control box into the universal
bracket, and one is inserted vertically . See Figure
6.
Figure 6. 230 Volt 2/4YC** & 4DC** Single Phase units WITHOUT Start Kit &
230/460 Volt Three Phase 2/4YC** & 4DC** units except 460 volt 2/4YC*3060A4, & 460 volt 4YCZ6 units
Mount Universal
Bracket to back
wall of Control
Box Using one
(1) Sheetmetal
Screw
(Horizonally).
Control
Module
Universal
Bracket
Mount Universal
Bracket to Control
Box using one (1)
Sheetmetal Screw
(vertically)
Control Box
2.
Continue with step 4
, Mount the Liquid Line
Sensor
, page 7.
