manualshive.com logo in svg

Trane BAYCOIL55, Руководство по установке

Поделиться
Скачать
Trane BAYCOIL55 Скачать руководство пользователя страница 1

A341869P22

ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES

IMPORTANT — This Document is customer property and is to remain with this unit.  Please return to service informa-
tion pack upon completion of work.

Replacement Coils

These instructions do not cover all variations in systems nor provide for every possible contingency to be met in connection with 
the installation. Should further information be desired or should particular problems arise which are not covered sufficiently for the 
purchaser’s purposes, the matter should be referred to your installing dealer or local distributor.

Installer’s Guide

Table of Contents

Section 1. Safety ............................................................................................................................2

Section 2. Overview and Common Steps ....................................................................................3

2.1 Common Preparation Steps

 ........................................................................................................................................3

2.2 Common Coil Removal and Retrofit

 ..............................................................................................................................3

Section 3. Coil with a Mechanically Fitted TEV ...........................................................................4

3.1 Remove the existing coil 

 ...........................................................................................................................................4

3.2 Remove the TEV from the Existing coil

 ..........................................................................................................................4

3.3 Installing the TEV onto the replacement coil

 ....................................................................................................................4

Section 4. Coil with a Brazed TEV ................................................................................................6

4.1 Remove the existing coil  

 ...........................................................................................................................................6

4.2 Installing the TEV onto the replacement coil

 ....................................................................................................................6

Section 5. Coil with a FCCV ..........................................................................................................8

5.1 Removing the FCCV

 .................................................................................................................................................8

5.2 Remove the existing coil 

 ...........................................................................................................................................8

5.3 Installing the FCCV into the replacement coil

 ..................................................................................................................8

Section 6. Reconnecting new coil assembly ............................................................................10

Includes all coil models
COL16255 through COL16291, COL16559, 
COL16760, COL16761

Kit numbers BAYCOIL55, 56, 57, 58, 59, 71, 
72, 73, 74, 75, 78, 79, 80, 83
 

18- AH47D1- 2

Содержание BAYCOIL55













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды