INSTALLER'S GUIDE
18-AH13D9-5A-EN
Page 2
Assembly Instructions
1.
Lay one of the side panels on a flat surface. Fasten the
front top angle to the side panel with two (2) screws as
shown in Figure 2.
2.
Fasten the front top angle to the other side panels with two
(2) screws as shown in Figure 3.
3.
Install two (2) screws into the front support bracket.
Figure 2
Figure 3
4.
Install four (4) screws into the holes beside the tab cut-outs
to secure the back support bracket.
Figure 4
Figure 5
No screw
needed (2 places)
