Trance Audio THE AMULET M Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 20

Trance Audio THE AMULET M Скачать руководство пользователя страница 9

9

NOTE: These descriptions of the way the controls operate are
based on having the controls mounted on the right side of the
soundhole, so they are visible to the right-handed player. The
controls can also be mounted on the left side of the soundhole if
desired, and doing so will reverse the positions of the controls,
as well as their operation (i.e. rotating the volume thumbwheel
towards the neck on this type of installation will increase the
volume).

The LED battery indicator will glow very dimly during operation, and
when the battery voltage drops to the point where it needs to be
replaced, the LED will flash brightly at 1 second intervals, alerting you
that you have a few hours or so to replace the battery without
compromising the audio performance of the system. The system will
operate at peak performance for 100+ hours (with a standard alkaline
battery) before the battery needs to be changed.

AMULET M-VT

This option includes all the features of the AMULET M-V

option, and adds a tone control thumbwheel as well. When rotated
completely to the right (towards the bridge) the control allows the full
range sound of the transducers to come through. When rotated to the left
(towards the neck of the instrument) the upper frequencies are gradually
reduced, allowing you to make any desired tonal mix right from your
instrument. The thumbwheel control is designed to make subtle changes
to the upper frequencies for the first half of the rotation to allow for more
precise control, and makes increasingly larger changes for deeper
sculpting of the tone in the second half of the rotation.

NOTE: When you unplug the cable from an M-V or M-VT
system, you will notice that the LED battery indicator will blink for
a few seconds after being unplugged. This is normal, and shows
that the voltages inside are powering down and the system is
shutting off. It is recommended that you make sure that the
volume thumbwheel is set to a lower (or off) position when
plugging into an amplifier and then adjusting to the desired level
to avoid any unpleasant surprises.

«
...
7
8
9
10
11
...
»

Содержание THE AMULET M





















Отзывы:

Нет отзывов