42546 - High-pressure Washer 1500 psi
23
Instruction Manual
English
11. Assembling and using the suction filter.
- This pressure washer has a system that allows
you to draw water from a tank or cistern. To do
that, use a 1/2” diameter hose, maximum 7.5 m
length and attach the water suction filter to the
end of the hose.
ATTENTION: never draw water from a tank
or cistern without using the filter. Do not draw
water from great depths. Maximum difference
in water level: 0.5 m.
0,5 m
0,5 m
13. Switching the machine on.
- Check the mains voltage and insert the plug
into the power outlet.
- To switch the pressure washer on, switch the
button to the right, to the “ON” position. To
switch it off, switch the button to the left, to the
“OFF” position.
12. Remove air trapped in the hose.
- Always remove all the air trapped in the hose
before running the machine.
- Run the faucet or water supply register with
the pressure washer off and press the trigger
until all the air has come out.
NOTE: never run the pressure washer with air
in the hoses, which can damage the motor.
