TRAMEX IRT2DP Скачать руководство пользователя страница 3

INTRODUCTION

The IRT2DP is a handheld dual laser, non-contact 
Infrared Thermometer and Dew Point detector with 
20:1 distance to spot ratio, tricolor light (and audible) 
indication as reading goes close to dew point tempera-
ture. It is used to measure surface temperature along 
with relative humidity, dew point temperature and 
ambient temperature. 
The temperature range is -50°C to 380°C (-58ºF to 
716ºF) and has an accuracy of approximately 1 to 
1.5%. The humidity range is from 0 – 100% RH. The 
dew point temperature range is  -30º to 100ºC (-22º 
to 212ºF) (see Specifications for details). The IRT2DP 
has a fast response time (0.15 sec) and is powered with 
a 9V battery and complies with Class II UK/EU laser 
safety standard EN60285.

KEY FEATURES

•   Rapid detection function
•   Precise non-contact measurements
•   Dual laser targeting
•   3 Mode display - Relative Humidity / Dew Point 
     Temperature / Ambient Temperature
•   Green  - Yellow – Red LED light and audible signal  
     indicate proximity to Dew Point Temperature
•   Automatic Data Hold 
•   User selectable ºC or ºF
•   Pre-set Emissivity of 0.95
•   Backlight LCD display
•   Unique flat surface, modern housing design

1

Содержание IRT2DP












Отзывы: