Traktor Kontrol S4, Руководство по установке

Страница: 33 / 49

4 Using the S4 with Your Computer
If you are using the S4 with your computer, follow the instructions in this section. Before con-
necting the devices, and setting up your TRAKTOR KONTROL S4, here are some points to be
aware of:
▪
When using the TRAKTOR software on a Windows system, make sure that you have instal-
led the S4 hardware driver with the TRAKTOR software installer before you connect the
S4 to your computer! For this, please follow the instructions specific to your operating
system in section
↑
2, Software Installation .
▪
The S4 may not work properly connected to a USB hub! Connect it directly to a USB port
on your computer.
▪
The S4—in combination with a power amplifier, speakers, or headphones—can produce
sounds in decibel ranges that may cause hearing damage. Also, switching off the device
with the volume control set to a high level may damage your loudspeakers. Always make
sure the volume faders on the S4 are set to minimum before connecting the power sup-
ply, connecting external equipment, playing music, or switching the device on or off.
Once everything is connected and set up, gradually raise the volume while music is play-
ing until you reach the desired listening level.
4.1 Connecting the S4 to Your Computer
To connect the TRAKTOR KONTROL S4 to your computer:
1.
Connect the device end (square plug) of the included USB cable to the USB socket on
the rear panel of your S4.
Using the S4 with Your Computer
Connecting the S4 to Your Computer
Traktor Kontrol S4 - Setup Guide - 33