Important notICe
Read all Safety Instructions listed at the beginning of this Operators Manual before operating
the GASOLINE IMPACT WRENCH.
1. Carefully read the instructions before operating.
2. Use only sockets and adapters, which are in good condition and are intended for use with power tools.
3. Adopt a suitable posture to counteract unexpected movement of the power tool.
4. If using a suspension device, ensure that the power to is securely fixed.
5. Release the start and stop device in the case of an interruption of the energy supply.
6. The operator should have enough strength to hold the tool stably when using the tool.
7. Use #10 lubricant, thick machine oil is not recommended.
FUEL
• Use only quality two cycle oil with gasoline at a mixture ratio of 25:1
(Gasoline : Two cycle oil) (Fig. 3)
• Never use gasoline only as engine will burn.
WARNING
Do not smoke and keep all other fire away from the fuel tank during
filling fuel as it causes fire it can burn yourself. (Fig. 3-1)
CAUTION
Wipe up all fuel spills before starting engine.
START UP ENGINE
1. Place the tool on a firm stand or solid floor.
2. Set gear change lever to neutral (N) position. (Fig. 3-2)
3. Slide stop switch to upward as shown. (Fig. 3-3)
4. Press priming bulb several times so that fuel slows through bulb
into carburetor. (Fig. 3-4)
5. Turn Choke lever to closed position. (Fig. 3-5)
6. Pull recoil starter handle strongly, taking care to keep the handle in
your grasp and not allow to withdraw rope until the end. (Fig.3-6)
CAUTION
Return recoil starter rope gently to its original position.
OPERATING INSTRUCTIONS
6
GASOLINE
TWO CYCLE OIL
(FIG. 3)
(FIG. 3-1)
(FIG. 3-2)
OIL POT PORT
GEAR CHANGE LEVER
