41
2. Check if FTP address is correct.
3. Check with your supplier if firmware filename is correct.
I accidentally set DSL to enable
and now the phone does not boot
up
1. Unplug the power cord from the IP phone. Wait 2 seconds and plug the
power cord back in the IP phone. Press and hold MENU key. The system
should bypass boot up and go straight into phone setup menu. Modify the
phone setting and make sure you save it before you exit.
Why do I get Can t Upgrade
Now screen when I click [Submit]
in the configuration menu?
1. Make sure you exit setting mode (phonebook, menu, speed dial ) before
you click [Submit] in the configuration menu.