Customer Service 1-888-707-1880 19 Dyaco Canada Inc. 2013
Step 10
Continue to attach the remaining 48 springs in the same manner as the previous step, i.e. the springs
must be placed on opposite sides of the mat in an alternating manner to ensure even distribution of
tension.
The completed trampoline should look as shown in FIGURE 10.
IMPORTANT:
Once all the springs are properly installed, you must go back to Step 5 and now tighten
all the screws on the Leg Supports.
Step 11– Trampoline Safety Placard Attachment
Attach Trampoline Safety Instruction Placard (# 8) to the trampoline frame using the strap provided as
shown in FIGURE 11. Make sure the strap is looped around the frame to ensure that it does not slide
off the trampoline.
FIGURE 10
Leg Support
FIGURE 11
Trampoline
Safety Placard
（
#8
）
