Customer Service 1-888-707-1880 12 Dyaco Canada Inc. 2013
STEP 3 – Top rail assembly
HINT
- Two people will be needed at this point to assemble the trampoline.
See FIGURE 1 from Step 1. Layout the support assembly like the diagram, combination 1, combination 2
and combination 3, and repeat.
Using the combination from Step 2, lift combination 1, insert top rail with leg socket (part 3) into one end of
the support assembly, part 6A. Lift combination 2 insert the other end of the same top rail with leg socket
into part 6B of combination 2.
Take another top rail with leg socket (part 3) and insert into part 6A of combination 2. Lift combination 3 and
insert the other end of the same top rail with leg socket into part 6A of combination 3.
Repeat the above step until all the support assemblies have been attached to the top rail with leg socket.
Install the top rail (4) into the gaps between the vertical leg extensions by inserting them into the slots as
shown.
FIGURE 3B
FIGURE 3A
hole
# 3
# 6B
# 6A
# 6A
# 6B
# 5
# 6A
# 6A
# 6B
# 6A
# 5
# 4
6A
# 6B
# 3
# 6A
# 6A
