manualshive.com logo in svg

TrailMax TRD-54-FBR, Руководство пользователя

Поделиться
Скачать
TrailMax TRD-54-FBR Скачать руководство пользователя страница 60

®

page 60

TRD-54-FBR

Warranty Claim Procedure

At Gem State Manufacturing, we insist on a high level of quality materials and work-

manship that go into every TrailMax trailer. Ultimately this will minimize the need for fre-
quent service and warranty claims. However, in the event of a claim, we want to be as
responsive as possible.

In the event that you have a problem with your trailer that may be warranty related, your

cooperation is appreciated when the following steps are followed in an effort to process
the claim expeditiously.

1. Have the trailer V.I.N. (Vehicle Identification 17 digit Number) and model No. available.

2. Refer to the Operators Manual when identifying defective parts. If the claim is structural
related, photos may be required and are helpful in determining how to correct the problem.
(Digital photo’s can be sent via e-mail to [email protected] in *.jpg or *.jpeg
format.)

3. Contact a TrailMax representative in your immediate area. If you do not have or can not
find a representative in your area, then contact the factory Warranty Administrator for as-
sistance @ 1-800-447-0213.

4. Give a detailed description and nature of the problem. Also leave contact name(s),
phone no. and/or e-mail address.

5. A claim will be processed and reviewed for warranty approval. The factory Warranty
Administrator must authorize all Warranty Claims before repairs can be made.

Note:  All work must be done by an authorized TrailMax warranty

station.

 

Should you choose to make repairs prior to approval, you

could assume full responsibility for repairs.

6. Defective parts must be returned to Gem State Manufacturing at 1705 Industrial Way,
Caldwell, Idaho, 83605, for evaluation unless otherwise instructed.

7. Please make sure you have followed the procedure all the way through, failure to do so
could hold up final process of Warranty Claim and approval for payment.

Our ultimate goal is to retain satisfied customers. Your cooperation is appreciated, as

we will process the claim as expeditiously as possible to get you back in service.

Section 4.

Warranty Claim Procedure

Содержание TRD-54-FBR





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды