TrailMax TRD-54-FBR страница 12 Скачать руководство пользователя | Manualshive

Страница: 12 / 60

background image

®

page 12

TRD-54-FBR

Operation

1.9

Hook-Up Procedures

TRAILER HOOK-UP

The consequences of not properly hooking the trailer to the tow vehicle

can be very serious. Failure to adhere to information in this section could
lead to the trailer becoming detached, the trailer brakes and/or lights not
working correctly, or other unsafe situations which could result in an acci-
dent causing property damage, bodily injury or death.

Connect the tow vehicle to the trailer and check that the coupler is completely latched.

Be sure that a safety pin is inserted to ensure coupler will not unlatch during transport.

Connect the electrical plug from the trailer’s harness to the receptacle of the tow ve-

hicle. Check all lights on the trailer to make sure they are working correctly with the tow
vehicle’s electrical system.

Be sure the landing leg and drop foot are fully retracted and the crank handle is

stowed in transport position. For trailers with 2-speed jacks, use low gear for raising
and lowering the jack under load, and high gear for raising and lowering the leg when
it is off the ground.

Check all safety chains and their attachment to both the trailer and the towing ve-

hicle. Connect safety chains to tow vehicle using crossed pattern under tongue. Allow
slack for turning, but avoid having chains drag on pavement. Make certain that all
attachment devices are properly installed and in good working order.

For trailers with air brakes

, connect the Glad Hands (one service and one emer-

gency) to tow vehicle. Shut off petcock(s) on air tank(s) or if already shut, open to
exhaust all moisture, then shut off. It is very important that the air system be drained of
moisture after each use to keep all components functioning properly and to make equip-
ment safe.

Trailers with electric brakes

come equipped with an emergency breakaway de-

vice. The breakaway system is designed to operate after the coupling system has failed.
Connect breakaway cable S-hook to bumper or hitch on tow vehicle. Allow slack for turn-
ing, but avoid letting the cable drag on pavement. Provide as straight a connection as
possible.

Always check that trailer brakes are working properly. If trailer is equipped with electric

brakes, use brake controller to adjust for load.

The breakaway system is for emergencies and is not a parking brake.

WARNING

!

«
...
10
11
12
13
14
...
»

Содержание TRD-54-FBR





























































Отзывы:

Нет отзывов

Похожие инструкции для TRD-54-FBR

2005 Ranger 4x4

Бренд: Polaris Страницы: 121

Бренд: FARMA Страницы: 36

JACOBSEN 4800 2006+

Бренд: E-Z-GO Страницы: 114

Бренд: Taylor-Dunn Страницы: 254

Бренд: Terra Cat Страницы: 12

Бренд: Satellite Suites Страницы: 39

Бренд: Can-Am Страницы: 144

Бренд: Cectec Страницы: 212

Бренд: Stels Страницы: 139

Бренд: KAYO MOTOR Страницы: 138

2014 TERRAIN 1000 72V CE

Бренд: Ezgo Страницы: 71

Бренд: Tatu Marchesan Страницы: 48

Бренд: UtilityMate Страницы: 8

Бренд: Thumpstar Страницы: 26

Бренд: Toro Страницы: 16

workman HDX-D 07368

Бренд: Toro Страницы: 60

Бренд: Subaru Страницы: 1418

Бренд: Hisun Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды