www.TrailFX.com
Page 3 of 4
Rev 101018
Read and understand all WARNINGS and INSTRUCTIONS before assembly and installation.
Ladder Rack has a maximum static load capacity of 600lbs. when properly installed and the load distributed
evenly between two complete units. Load capacity is greatly affected by the design, strength and capacity of the
vehicle, intended load and must be determined by installer/user.
Ladders must be secured per ANSI standard A14.2-1990 paragraph 8.4.4.
This product is primarily intended for transporting ladders. It can be used for transporting lumber, pipe and other
similar materials when properly tied down and not exceeding capacity of the ladder rack or more importantly, the
vehicle. It is the responsibility of the user of this rack to safely secure these materials to the rack before
transporting. Any modifications made to this product for any other purpose other than its intended use could
create a hazardous condition that can cause serious personal injury or property damage.
Any modification or unintended use of this product shall immediately void all manufacturer's warranties.
Manufacturer disclaims all liability for injuries to persons or property resulting from any modification to or
unintended use of this product.
Stop Bolt
U-Bolt
2-Hole Clamp Plate
(2) 10mm Flat Washers
(2) 10mm Lock Washer
(2) 10mm Hex Nuts
Fig 4
Fig 3
