www.TrailFX.com
Page
3
of
3
Rev 052518
PRODUCT CARE
Periodically check the product to ensure all fasteners are tight and components are intact.
Cleaning your hood protector-use only soapy water and a soft cloth. Never use paper towels, petroleum product, or solvents to clean your hood
protector.
Check out these other TrailFX Products!!
www.TrailFX.com
FAQ’s
1.
Mounting Bracket are not getting Installed properly.
In some cases Illustration images shown in Installation manual may not be the exactly same as per actual vehicle images ,also if Driver /
Passenger side mounting brackets are very identical in the design, suggest referring Parts Identification guide to avoid fitment issue.
2.
Products are thumping / rattling after installation.
Please ensure that all required mounting brackets
/ hardware’s are installed & tighten correctly. Suggest using white lithium / regular
grease between the metal to metal contact surfaces.
3.
Missing / Excess Hardware.
Recheck hardware count as per the part list.
4.
Product not installing properly.
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.
Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time
of purchase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of
fitness for a particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product
at our option, when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this
product voids the warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically
excludes liability for any incidental or consequential loss or damage.
