Trailboss QTHY263L Скачать руководство пользователя страница 9

Страница: 9 / 10

Wiring Loom Fitting Instructions

To Suit Hyundai Santa Fe DM / DM2 / DM3

Part Number 100863-WL

Page

6 of 6

Issue Date

21-12-15

Cequent Customer Service

Ph: 1800 812 017 Fax: 03 9797 3299

Post: PO Box 4050, Dandenong South VIC 3175

29. Connect the power patch 1-way connector (5) into the add-a-fuse harness mating

connector (6).

30. Mount the tail harness (DM / DM2: 1200mm, DM3: 1800mm) trailer socket to the tow

bar mounting bracket using M4 fasteners (not supplied).

31. Route the tail harness across the tow bar towards the LHS of the vehicle and up through

the previously drilled out hole.

32. Ensure the tail harness grommet is seated correctly and secure in place using a cable

tie (not supplied).

33. Connect the tail harness (tail length 1200mm) 8-way connector to the trailer patch

mating 8-way connector.

34. Test the trailer patch function using a light board or multi meter.

35. Secure all harnesses using cable ties (not supplied).

36. Re-fit all removed parts and secure all fasteners, ensuring there are no squeaks or

rattles.

37. Place the fitting instructions in the glove box after fitment.

38. The RPA function can be disabled via the switch on the dash panel.

Содержание QTHY263L










