Wiring Loom Fitting Instructions
To Suit Hyundai Santa Fe DM / DM2 / DM3
Part Number 100863-WL
Page
3 of 6
Issue Date
21-12-15
Cequent Customer Service
Ph: 1800 812 017 Fax: 03 9797 3299
Email: [email protected]
Post: PO Box 4050, Dandenong South VIC 3175
14. For Santa Fe DM1 and DM2 models only:
On the RHS rear quarter of the vehicle, drill a Ø30mm hole (1). File any rough or sharp
edges and spray with rust inhibitor.
15. For Santa Fe DM3 models:
Locate the existing vehicle grommet hole and remove the grommet (1). Drill out the
grommet hole to Ø30mm. File any rough or sharp edges and spray with rust inhibitor.
1
16. File any rough or sharp edges and spray with rust inhibitor.