Trailboss QTFD962L Скачать руководство пользователя страница 5

Страница: 5 / 5

Wiring Loom Fitting Instructions

To Suit Ford

AU/BA/BF/FG (tug body) XR6/XR8

Falcon AU Cab Chassis (July 1999 onwards)

Falcon AU Cab Chassis (8ft tray)

Falcon Ute Tub Body AU – FG

RTV Cab Chassis & Tub Body

Page

2 of 2

Issue Date

12-02-10

Cequent Customer Service

Ph: 1800 812 017 Fax: 03 9797 3299

Post: PO Box 4050, Dandenong South VIC 3175

1. Locate the vehicle 8-way Breakout connector underneath the rear of the vehicle.

2. Connect the Trailer Harness Patch (P/N 100023-WL) connector to the 8-way Breakout

connector.

3. Secure the Trailer Socket to the vehicle with M4 Fasteners.

4. Connect the Tail Harness (Length 1200mm) to the Trailer Harness Patch.

5. Bundle the excess Tail Harness length up and secure to the existing vehicle harnesses

with cable ties (not supplied).

6. Test the Tail Harness socket using a light board or multimeter.

7. Secure the all harnesses using cables ties (not supplied).

8. Refit all removed parts and secure all fasteners.

9. Place instructions in glove box after fitment.

Содержание QTFD962L





