6
Trail Tech Voyager
FAQ
Frequently Asked Questions
1. Voyager will not turn on:
The internal
battery may need to be charged before use,
connect to vehicle power or use the wall charger
(wall charger sold separately.)
2. How long does the internal battery take to
charge fully?
No need to pre-charge; connect
and ride. Voyager takes 3-8 hours to fully
charge depending on charge mode.
3. How do I get the best reception?
The
internal antenna is designed for optimum
reception potential. If Voyager is mounted with
metal blocking the internal antenna, consider
purchasing the external antenna.
4. How do I mount Voyager to my machine?
Vehicles with handlebars can use the included
handlebar mounting hardware. There are also
protective accessory mounts available, or utilize
the two mounting holes in the back of Voyager to
fix to a flat surface.
5. What kind of power does Voyager need
for proper operation?
Voyager is intended to
work on regulated AC or DC motorcycle power
systems. The DC input range is 12V to 65V.
The AC input range is 12V RMS to 150V peak
input. Voltages greater than 150V may damage
Voyager. DC power systems with a failing
vehicle battery may produce too low a system
voltage (<11.5V) to allow for proper operation.
6. Voyager kits include physical sensors,
magnets, and other cables. Why does
the unit need this if it’s a GPS?
You can
use Voyager handheld without any sensors
connected. However, physically bolting Voyager
to your vehicle provides many advantages over
a conventional handheld GPS.
A. Power from the machine enables several
integration features, such as extended run-time
and maintenance-free charging.
B. The engine temperature sensor monitors
Содержание Voyager
Страница 1: ...MOTO GPS ...
