INTRODUCTION
CONGRATUALATIONS on your purchase of this Traeger COM150. With the proper set-
up, operation, and maintenance, this grill will provide years of cooking performance.
READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO FINISH
ASSEMBLING YOUR GRILL.
SET-UP:
Your Traeger com 150 comes almost completely assembled You will need to
complete the assembly by:
1) Installing the four swivel casters.
Tools
required
for
the
assembly of your COM150
1 3/4" Box end wrench
1 1/4" Wrench or nut driver
1 Pair of pliers
When you un-box your grill, make sure you have, and can identify the following parts:
(2)
Grease
drain
pan
(4)
(2) Porcelain coated grill (3)
(2)
Grease
bucket
(8)
(2)
Heat
baffle
(5)
(2)
Swivel
caster
with
brake(16)
(2) Swivel caster without brake (2)
NOTE: THE NUMERALS FOLLOWING PART NAMES THROUGHOUT THIS
MANUAL REFER TO THE COMPONENT DIAGRAM ON THE PREVIOUS PAGE.
Follow these step by step instructions and you’ll be cooking in no time!
