10
INITIAL FIRING INSTRUCTIONS
F
225
180
325
275
375
Smoke
Shut Down
Cycle
High
Temperature
Power
OFF
ON
375
Smoke
Shut Down
Cycle
High
Power
OFF
ON
375
Smoke
Shut Down
Cycle
High
Power
OFF
ON
Remove the porcelain-coated grill
grate, grease drain pan, and both
upper and lower heat baffles from
the inside of the grill.
With the switch in the OFF (
O
)
position, plug the power cord into an
appropriate grounded electrical outlet.
Make sure there are no foreign objects
in the auger. Turn the switch ON (
I
)
and the temperature dial to SMOKE.
Make sure the auger is turning (inside
the pellet hopper).
Check that there is air movement from
the draft inducer fan by placing your
fingers over the firepot. If the hot rod
is getting hot, it will turn red.
CAUTION! Do not touch the hot rod.
Turn the temperature dial to
SHUT DOWN CYCLE.
To be used on initial firing or any time the grill runs out of pellets.
In order to ensure proper operation of the grill, you must first allow the
auger tube to be “charged” with pellets.
1
2
3
4
66102_Century20_v08.indd 10
2/3/16 2:11 PM