Un-boxing Your Grill:
Carefully remove the staples from around the sides of the box. With one other person,
lift the box up and over the barbecue.
Removing The Barbecue From the Wooden Skid:
Installing The Casters:
Lay the barbecue on its back. A clean piece of cardboard or blanket should be placed
under the barbecue to prevent scratching the finish. install the four casters following the
diagram below:
Removing The Barbecue From The Skid
Note: This task requires TWO people
1) Following the diagram, pull the Warmer
Drawer all the way open.
2) On the left and right sides of the drawer,
you will see the door tracks which the
drawer slides on. Per the drawing, find
the release lever on each side of the
drawer.
3) Push the lever in the direction of the
indicator arrow. The left side lever goes
up, the right side lever goes down.
4) Hold the levers in the direction indicated
and pull the drawer all the way out of the
barbecue.
5) Looking inside the barbecue through the
drawer opening locate the four ¼ inch
hex bolts that hold the barbecue to the
skid. Remove with ¼ inch socket driver.
6) With one person on each side of the
barbecue, carefully remove the barbecue
off the skid and place on a level surface.
Caster Receptacles
Bottom of BBQ
Receptacle
Caster Pin
IMPORTANT NOTE!
Make sure you install the 2 LOCKING
casters on the front of the unit.
