TRADINGZONE SMARTLINE SITTING/STANDING CORNER TABLE STESI, Руководство по сборке и эксплуатации

Страница: 37 / 56

SOLUTION. POSSIBLE PROBLEMS
Error Pt. Action 1 Result 1 Problem Action 2 Result 2
TABLE ONLY TRAVELS
WITH ONE COLUMN
3.1
Disconnect power plug
Connect/check motor cable
Connect power plug
Click code audible
Reset system
Table works pro-
perly Motor cable was
incorrectly connected
3.2
Disconnect power plug
Connect replacement manual control Pro
Connect power plug
Reset controller to factory setting
and reset system
Table works pro-
perly
Motor cable was incor-
rectly connected before
start-up
Action according to error message
Error message:
……………….
TABLE ONLY MOVES A LIMITED
DISTANCE AND MOVES 5 CM IN
THE OPPOSITE DIRECTION
(COLLISION PROTECTION ACTIVE)
4.1 Remove obstacles from path of travel
Table works pro-
perly Obstacles in the path of
travel
4.2
Eliminate tension by raising
the table on one side Table works pro-
perly The table frame
was under tension
4.3
Column is roll resistant and
needs to be exchanged Table works pro-
perly
TABLE ONLY TRAVELS
A LIMITED PATH
5.1 Deactivate or adjust container/shelf-stop
Table works pro-
perly Container/shelf-stop was
activated
5.2
Overload on motor (table travelled to
obstacle, table is massively overloaded
Remove obstacle, reduce load
Table works pro-
perly
Table travelled to obsta-
cle, table is massively
overloaded Connect replacement Manual con-
trol switch Pro
Action according to error message
Error message:
……………….
LIFT DESK. POSSIBLE PROBLEMS