TRADINGZONE SMARTLINE SITTING/STANDING CORNER TABLE STESI, Руководство по сборке и эксплуатации

Страница: 36 / 56

36
SOLUTION. POSSIBLE PROBLEMS
LIFT DESK. POSSIBLE PROBLEMS
Error Pt. Action 1 Result 1 Problem Action 2 Result 2
TABLE
DOES NOT WORK
(NO AUDIBLE CLICK
CODE)
1.1
Check the power supply from the bottom tank to
the controller (disconnect power plug, check all
power connections and cables, check the power
supply in the room, plug in power plug
Click code must be audible from the controller)
Click code (double-click) is audible No power supply Reset the system
Table works
properly
1.2 Replace controller Click code (double-click) is audible Controller was defective Reset the system
Table works
properly
TABLE
DOES NOT WORK
(AUDIBLE CLICK CODE)
2.1
( triple click code audible)
Disconnect power plug
Plug in/check motor cable
Plug in power plug
Click code (double-click) is audible
Column was incorrectly
connected
Reset the system
Table works
properly
2.2
( triple click code audible)
Disconnect power plug
Check that column is identical version (label on
cable ends and plug colour) if
different components are installed,
install identical components
Connect power plug
Click code (double-click) is audible
Different components
combined
Reset the system
Table works
properly
2.3
Read error message
(with Manual control PRO only)
Error message: ………………. acc. to error message
Failure to
operate
2.4
Click code (double-click) is audible
however, fails to operate
Disconnect power plug
Disconnect manual control
Connect replacement manual control
Connect power plug
Reset the system
Table works properly
Manual controller defec-
tive