Tradesman M2501W, Руководство пользователя

Страница: 7 / 26

CARTON CONTENTS
UNPACKING YOUR MITER SAW
To avoid injury from unexpected starting or electrical shock,
do not plug the power cord into a source of power during
unpacking and assembly. This cord must remain
unplugged whenever you are adjusting/assembling the
saw.
1.
Remove the miter saw from the carton. IMPORTANT:
Do not lift the miter saw by the switch handle or miter
table handle. It may cause misalignment. Lift only by
the built-in carry handle located at the top of the
machine.
2. Place the saw on a secure stationary work surface.
3. Separate all parts from the packing material. Check
each one with the illustration below to make certain all
items are accounted for, before discarding any packing
material.
If any part is missing or damaged, do not attempt to
assemble the miter saw, or plug in the power cord until the
missing or damaged part is correctly replaced. To avoid
electric shock, use only identical replacement parts when
servicing double insulated tools.
Miter Table
Handle
Blade Wrench
Dust Bag
Hold-down Clamp
7
CAUTION
!
CAUTION
!
Miter Saw
Blade