background image

3

INSTRUCTION MANUAL

Thank you for choosing the TRADER MESPBT Speaker Bluetooth 6.5” 30 Watts,  

2 Speaker pack.
This innovative design and advanced engineered product, provides easy installation and setup 

and is designed for high quality sound and ease of use.
This manual describes the installation of MESPBT series speakers within conventional stud and 

joist and plasterboard ceiling applications.

IMPORTANT SAFETY WARNING BEFORE USE PLEASE READ COMPLETELY AND USE THE 

PRODUCT IN ACCORDANCE WITH THESE SAFETY INSTRUCTIONS.
This product is supplied with a 15V dc power pack that runs from a 220-240V ac supply, and if 

there are additional electrical works required to provide a power source, these must be carried 

out by a licensed electrician in accordance with AS/NZS3000 wiring rules.
If the unit is to be used as a replacement for an existing product, remove the existing unit from its 

location and disconnect the plug from the socket. Ensure cables are not trapped and the 

powerpack is clear and away from insulation.

READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION 

PROCESS AND KEEP THEM SAFE FOR FUTURE REFERENCE.
•   Failure to follow the instructions in this guide voids all warranties on your speakers.
•   Warning: Do not use the product in water or near wet areas.
•    Warning: Do not install speaker directly above any heat sources such as radiators, or other 

apparatus that creates heat.

•   Protect the power cable from being damaged, do not over stretch cable.
•   Where the speakers are powered from a 240V surface socket in the ceiling it is recommended 

to use an accessible wall mounted control switch to turn them on and off where required 

when not in use.

•   Turn off the power to the speaker when unused for long periods of time.
•   Ensure the speakers are not covered with insulation when installed in the ceiling.
•    Ensure speaker location is free from obstructions such as electrical conduit, HVAC ducts or 

water lines.

•   If used in applications where noise may be an issue such as ceiling spaces for multistorey 

installations for floor/ceiling positions, in-ceiling speaker boxes with sound insulation are 

available in the market that can be used with these products.

•   To make sure that the unit will function normally, it must be used in rooms with a temperature 

between 5°C and 35°C. 

Содержание Meerkat Bluetooth MESPBT









Отзывы: