Jul-18
Product Code: 2826T
Made in China to TQB Brands Pty Ltd specifications
Page 5
Visit us at www.tqbbrands.com.au
3.
BEFORE USE
Prior to each use conduct a visual inspection checking for abnormal conditions, such as
cracked welds, leaks, and damaged, loose, or missing parts.
•
Consult the vehicle owner’s manual to determine the location of lift points.
•
Be sure to set the vehicle in park with the emergency brake on and wheels securely
chocked.
•
Be sure that the vehicle and the jack are on a hard, level surface.
4.
OPERATION
•
Connect a compressed air supply to the jack. (Compressed air should be clean, dry,
and regulated at 85-140psi).
•
Make sure the jack and vehicle are on a hard level surface.
•
Always set the vehicle parking brake and chock the wheels.
•
Turn release knob completely counter clockwise, and place the control rod in
Position A.
•
Position the jack under the vehicle using the manufacturer's recommended lifting
points on the chassis. The jack must be free to roll without any obstructions while
lifting or lowering the vehicle.
•
Always position approved jack stands under the vehicle at points that will provide
stable support in accordance with the vehicle manufactures recommendations.
•
Always lower the vehicle slowly onto the jack stands by turning the release knob
counter clockwise.
Raising Vehicle
•
To raise the vehicle to the desired height, squeeze the lift control air, pump the jack
handle or pump the foot pedal until the saddle touches the vehicle.
•
Check the placement of the saddle lugs. Finish lifting the vehicle.
•
Position approved jack stands beneath the vehicle at locations recommended by the
vehicle manufacturer. Do not get under the vehicle without jack stands. Jacks are
not designed to maintain heavy loads for long periods of time. Do not attempt to
put jack stand simultaneously under both ends of vehicle or under one side of
vehicle.
•
Turn release knob SLOWLY counter clockwise to lower load onto jack stands.
Lowering Vehicle
•
Turn the release valve clockwise to the closed position.
•
Squeeze lift control air valve, pump the jack handle or pump the foot pedal to lift
vehicle off of the jack stands.
•
Remove the approved jack stands. Do not get under or let anyone else under the
vehicle while lowering.
•
Turn the release knob SLOWLY counter clockwise to lower the vehicle onto the
ground.
