09/20
Product Code: 2010T
Made in China to TQB Brands Pty Ltd specifications
Page 3
Visit us at www.tqbbrands.com.au
STANDARD OPERATING PROCEDURE
DO NOT
use this machine unless you have been trained and assessed to a competent level in its sate use and operation, and
have been given permission to use this
PRE-OPERATIONAL SAFETY CHECKS
•
Keep work area clean and well lit. Cluttered or dark work areas invite accidents.
•
ALWAYS wear suitable personal protective clothing, gloves and eyewear manufactured to the latest Australian Safety
Standards.
•
ALWAYS ensure that adequate lighting is available. A minimum intensity of 300 lux should be provided. Ensure that lighting
is placed so that you will not be working in your own shadow.
•
Use as intended only. Do not use this item to raise or move a vehicle.
•
ALWAYS use according to vehicle’s service instructions only. It is beyond the scope of this
manual to provide body/frame
repair guidelines. It is the responsibility of the user to consult a body/frame repair technical manual for full instructions.
•
Stay clear of hydraulic ram during operation. Position body as far away as practical when hydraulic ram is under load. Ram
can slip suddenly, causing injury.
•
This Porta Power Equipment is designed for straightening vehicle body/frame applications. Using this equipment in an
application for which it is not designed could result in overloading, reduced load capacity, reduced stability and/or system
failure.
•
Do not overload the hydraulic system; creating pressure beyond the rated capacity of the pump and ram may result in
personal injury. Overloading is indicated by bowing extension tubes or slipping attachments.
•
Some components in this set do not match the maximum pressure rating of the pump and ram.
•
USE A PRESSURE GAUGE IN THE SYSTEM TO MONITOR HYDRAULIC PRESSURE (NOT INCLUDED).
•
Refer to the instructions in this document for typical applications and load capacity.
•
When extension tubes are used, the rated capacity is always reduced by 50% for each tube that is connected.
•
Attachments and extension tubes must be aligned and fully engaged so ram force is straight, avoiding an off-centre load
condition.
•
Keep the Hose Couplers protected when the not in use. Screw Dust Caps onto Hose Couplers when not in use to keep Ram
internal mechanisms clean.
•
Use the right product for the job. There are certain applications for which the Porta Power Equipment was designed. Do not
modify the hydraulic body repair kit and do not use the hydraulic body repair kit for a purpose for which it was not
intended.
•
ALWAYS regularly check for damage. If any part of this Porta Power Equipment is damaged it should be carefully inspected
to make sure that it can perform it’s intended function correctly. If
in doubt, it should be repaired or replaced. Refer all
servicing to a qualified technician.
•
When servicing, use only TradeQuip identical replacement parts. Use of any other parts will void the warranty.
•
Do not modify this Porta Power Equipment and do not use for a purpose for which it was not intended.
INTENDED USE
For regular professional collision repair and medium duty applications where the convenience of hydraulic power can be utilized
for spreading, clamping, pushing and lifting.
Safety glasses must be worn when operating this
equipment
Long loose hair must be contained when operating
this equipment
Safety footwear must be worn when operating
this equipment
Close fitting/protective clothing must be worn
when operating this equipment
Rings and jewellery must not be worn when
operating this equipment
