Important safety and compliance information
96
11.
If the equipment is not used for a long time, disconnect the equipment from
outlet to avoid damage to the system by transient voltages.
12.
Do not spill liquids onto equipment; this may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
14.
If any of the following situations arises, have the equipment checked by
qualified service:
a.
The power cord or plug is damaged.
b.
Liquid seeped into the equipment.
c.
The equipment has been exposed to moisture.
d.
The equipment does not work well or operation does not match behavior
described in user's manual.
e.
The equipment has been dropped or damaged.
f.
The equipment has obvious signs of damage.
15.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE TEMPERATURES EXCEED 70
°C (158 °F); IT MAY DAMAGE THE EQUIPMENT.
Symbols
The following symbols may be placed on the equipment to indicate the presence
of potential hazardous condition.
This symbol indicates the presence of hazardous energy circuits or
electric shock hazards. Refer all servicing to qualified personnel.
WARNING:
Do not open this enclosure to reduce the risk of injury from
electric shock hazards. Refer all maintenance, upgrades and servicing
to qualified personnel.
CAUTION:
There is a risk of personal injury and equipment damage. Follow
the instructions.
CAUTION:
The following label indicates sharp edges, corners or joints
nearby.
CAUTION:
The following label indicates a hot surface nearby.
Hot surface. Avoid contact. Surfaces are hot and may cause
personal injury if touched.
WARNING:
Allow the surface to cool before touching to reduce the
risk of injury from a hot component.
CAUTION:
This symbol indicates the presence of electric shock
hazards. The area contains no user or field serviceable parts. Do
not open for any reason.
WARNING:
Do not open this enclosure to reduce the risk of injury
from electric shock hazards.
CAUTION:
This symbol indicates hazardous moving parts are nearby.
Содержание R2-1218R-TH
Страница 68: ...Diagrams 68 Diagrams System board diagram...
