TRADEDX R2-1218R-TH, Руководство пользователя

Страница: 43 / 102

Installation 43
DIMM speeds are supported as indicated in the following table.
Populated
slots (per
channel) Rank Speeds supported
(MT/s)
1
Single- or
dual-rank 2133, 2400
2
Single- or
dual-rank 2133, 2400
Removing a memory module
The system board includes 16 (four memory channels per processor) DIMM slots for
the installation of DDR4 2133/ 2400 MHz memory.
To remove the memory module:
1.
Power off the server, and then detach all of the power cords from the power
supplies.
2.
Remove the access panel (on page 23).
3.
Push the locking latches of the DIMM slot downward and outward to eject the
memory module.
4.
Remove the memory module.
5.
Repeat the process for the additional memory modules.
Installing a memory module
The system board has 16 DIMM slots for the installation of up to 16 DDR4 1866/2133
MHz DIMMs.
To install the memory module:
1.
Pull the locking latches of the DIMM slot outward.
2.
Place the memory module into the socket so the notch and obstruction are
aligned.