TRADEDX JBOD76, Руководство пользователя

Страница: 54 / 82

54
The dhcp command used to enable or disable DHCP function.
Examples
EEB00 >dhcp disable
DHCP function enable/disable -
DHCP function is disabled.
disable
Syntax
disable Device Name(S) FRU-ID(D)
Parameters
Device Name: „port‟ or „disk‟.
FRU-ID: ID of the port or disk. Use „all‟ parameter to disable all ports or disks.
Description
The disable command used to disable specific PHYs on disk or port.
Examples
EEB00 >disable port 0
EEB00 >disable disk 13
disk
Syntax
disk Option(S)
Parameters
Option: Function name for the disk command. All supported function names are listed below.
info: List all disk informationtemp: Show all disks temperature. The unit is Celsius.
speed: Show all disks PHY link speed. (1.5G, 3.0G, or 6.0G)
type: Show the disk interface type is SATA or SAS.
zone: Show the disk zone number.
ident: Show if disk is in identify status.
fault: Show if disk is in fault status.
hotspare: Show if disk is in hot-spare status.
conschk: Show if disk is in consistency check status.
ok: Show if disk is in OK status.
rebuild: Show if disk is in rebuild status.