background image

Model SWLSPR-6 Landspeeder Bed Frame

Revised 04/11/2016

Page 

6 of 6

Step 2 - B: Fasten shelf [H] to headboard [D] and shelf rear support [G] with screws [I].

Step 3: Fasten mattress support bars [B] to support rail of side assemblies [A] using screws [C]. Use
(1) screw at each end of support bar. Make sure support bar end is tight and perpendicular with side 
of bed. Start at rear of bed and work towards front. Leave 4.5” gaps between each support bar 
(approximately 7” center-to-center).

Step 4: Tighten all hardware. Make sure all assembled parts are tight and secure.

Отзывы: