background image

Model SWLSPR-6 Landspeeder Bed Frame

Revised 04/11/2016

Page 

3 of 6

Disassembly

To disassemble, reverse order of steps for assembly.

Care and Maintenance

 Check all fasteners periodically for tightness.

 Clean the surface using a slightly damp cloth if necessary. Do not use any corrosive cleaning 

products or abrasives that may degrade or damage the surface. Furniture polish may be used to
clean dust off the surface.

 We recommend that any cleaning materials first be tested on a surface that would not be visible 

during the course of normal use.

 Lift slightly when moving on carpet or rough surface to avoid bending or damaging the 

supporting structure of the bed.

 Use of a vaporizer close to bed may cause the surface to swell and the surface to peel.

 Check the mattress periodically and when changing sheets to ensure mattress is tight against 

headboard.

Assembly Notes

Hardware notes: do not fully tighten any fasteners until all hardware is in place. Failure to follow 
these instructions may cause fasteners to misalign during assembly. If using power tools to aid in 
assembly, use caution. Power tools may over-tighten fasteners and split or damage the material.

Tools required (not included):
Phillips head screw driver
7/16” wrench or adjustable wrench

Important Information

Each one of our beds is handmade, hand painted, and hand packaged. Minor imperfections may 
occur that are not manufacturing defects, but rather a result of the handcrafting process that makes 
our beds unique and special.

After unpacking, this product may have an associated smell for several days. This smell is merely a 
result of the natural linseed oils and/or other products used in the preparation and manufacturing of 
the material, and does not contain harmful products. The smell should completely dissipate within 
several days. The smell may be stronger on products with areas of exposed unpainted material.

Отзывы: