Tradecraft Specialties MAST-2, Инструкция по эксплуатации

Страница: 3 / 10

Model MAST-2 Bed Frame Accessory Revised 10/03/2016
Page
3 of 10
Disassembly
To disassemble, reverse order of steps for assembly.
Assembly Notes
Hardware notes: do not fully tighten any fasteners until all hardware is in place. Failure to follow
these instructions may cause fasteners to misalign during assembly. If using power tools to aid in
assembly, use caution. Power tools may over-tighten fasteners and split or damage the material.
Tools required (not included):
Phillips head screw driver
7/16” wrench or adjustable wrench
Care and Maintenance
● Check all fasteners periodically for tightness.
● Clean solid surfaces using a slightly damp cloth if necessary. Do not use any corrosive cleaning
products or abrasives that may degrade or damage the surface. Furniture polish may be used to
clean dust off solid surfaces.
●
We recommend that any cleaning materials first be tested on a surface that would not be visible
during the course of normal use.
● Use of a vaporizer close to this product may cause the surface to swell and the surface to peel.
● Do not machine-wash fabric; machine-washing may cause fabric to shrink. To clean fabric, hand
scrub or brush with light water use (such as a spray bottle) and/or an appropriate soap for use
with outdoor canvas. Rub dry immediatly after cleaning. We recommend that any cleaning
materials first be tested on a surface that would not be visible during the course of normal use.