Model M3KGT-5 Sports Car Bed Frame
Revised 10/09/2017
Page
5 of 7
Step 1:
Ensure there is enough room to lay out all parts. Carefully unpack all parts and hardware
and check that everything is present and undamaged. It is helpful to have more than one person
available for assembly.
Step 2 - A:
Loosely fasten side assemblies [A] to rear shelf support [G] using lag bolts [E] and flat
washers [F], (1) lag bolt per side with a washer on each lag bolt.
Do not yet fully tighten lag bolts.
Assembly Steps
Step 2:
Loosely fasten side assemblies [A] to headboard [D] using lag bolts [E] and flat washers [F],
(2) lag bolt per side with a washer on each lag bolt.
Do not yet fully tighten hardware.
