Model DUMPTR-1 Dump Truck Bed
Revised 5/22/2014
3 of 6
Assembly
Notes:
do not fully tighten all bolts until all hardware is in place. Failure to follow these in-
structions may cause the bolts to misalign during assembly. If using power tools to aid in as-
sembly, use caution. Power tools may over-tighten fasteners and split or damage the mate-
rial.
Tools required (not included):
Phillips head screw driver
7/16” wrenches, sockets, or adjustable wrenches
Parts List:
Part #:
Quantity:
Description:
Reference image only (not to scale):
[A]
(2)
Side assembly
[B]
(2)
Mattress support rail
[C]
(11)
Mattress support bar
[D]
(1)
Shelf front section
[E]
(1)
Shelf rear section
[F]
(1)
Shelf
[G]
(6)
¼” lag bolt
[H]
(22)
¼” carriage head bolt
[I]
(20)
¼” hex head bolt
[J]
(42)
¼” hex nut
[K]
(8)
Screw
[L]
(6)
1/4” flat washer
