Model DUMPTR-1 Dump Truck Bed
Revised 5/22/2014
2 of 6
Use and Warnings
Your child’s safety is our top priority. Please observe the following safety warnings to ensure
the safe use of this product:
●
Mattress size: This bed is intended for use only with a standard twin mattress 74” - 75”
long by 37 1/2” - 38 1/2” wide (mattress not included). Use of an incorrectly sized mat-
tress may leave space between the edge of the mattress and the edge of the bed. Ex-
cess space may result in entrapment which may lead to serious injury or death.
●
Weight limitation: minimum weight requirement for this bed is 50 lbs. This product is not
to be used by any occupant under 50 lbs. Do not let any child under 50 lbs. play or sleep
on or around the bed. Maximum weight is 350 lbs.
●
Do not stand or sit on shelf.
●
Do not stand, sit, or otherwise occupy or apply weight to bed slats until a mattress or
box spring has been installed. The slats are not rated or tested for individual loads with-
out the application of mattress or box spring.
●
Do not allow jumping or horseplay on the bed.
●
Do not use bed if any parts are missing or damaged.
●
Do not use substitute parts. Contact manufacturer should replacement parts be neces-
sary.
●
Do not use a water or sleep flotation mattress.
●
Before assembly and use, inspect bed for damaged hardware, loose joints, missing
pieces or sharp edges.
●
Warning: hardware included with this product may have sharp points or edges. Assem-
bly by an adult is required. Keep all loose hardware out of reach of children.
●
Warning: small parts are a choking hazard for children. Make sure that all hardware is
properly and tightly installed to prevent access to loose parts by children. Properly dis-
card excess hardware after assembly to prevent access of loose parts to children. Prop-
erly discard all packing materials.
●
Always make sure the mattress is firmly seated against the headboard. Excess space
may result in entrapment which may lead to serious injury or death.
Care and Maintenance
●
Check all fasteners periodically for tightness.
●
Clean the surface using a slightly damp cloth if necessary. Do not use any corrosive
cleaning products or abrasives that may degrade or damage the surface. Furniture pol-
ish may be used to clean dust off the surface.
●
We recommend that any cleaning materials first be tested on a surface that would not
be visible during the course of normal use.
●
Lift slightly when moving on carpet or rough surface to avoid bending or damaging the
supporting structure of the bed.
●
Use of a vaporizer close to bed may cause the surface to swell and the surface to peel.
●
Check the mattress periodically and when changing sheets to ensure mattress is tight
against headboard.
