TRADEair MCFRC241, Инструкция по безопасности и эксплуатации

Страница: 7 / 13

--------------------------------------------------------------------------------------------------------------
1. Wheels and axle set
2. Rubber foot
3. Air Filter
•
Fit the wheels to the unit using the axle
kit provided and insert the rubber stopper into the
spigot on the bottom of the tank.
•
Fit the air filter to cylinder head of the compressor.
INITIAL STARTUP
•
Ensure the unit is stable in a well-ventilated dry position.
•
Ensure that the drain valve is closed and all air outlets are closed.
Connect the power lead to the mains.
•
Start the compressor by pulling on the red knob.
Note: Output fittings may differ from those shown
Warning : Use the red knob to turn the unit on and off, not the mains switch. Turning the unit on
and off from the mains only will result in damage to the motor
OPERATION
The pressure in the tank is controlled by the action of the pressure switch located under the
pressure switch cover
When the set maximum pressure is reached the pressure switch activates and the motor is
Turn on
Turn off
Tank gauge
Regulator gauge
Pressure regulator
Air outlet
Safety valve