TracVision R6ST, Руководство по установке

Страница: 2 / 11

3
a. Unpack the box and ensure it contains
everything shown on the Contents List.
Save the packaging for future use.
b. Carefully examine all of the supplied
parts to ensure nothing was damaged in
shipment.
c. Gather all of the tools and materials listed
below. You will need these items to
complete the installation.
• Phillips and flat-head screwdrivers
• 7/16" open-end wrench
• Silicone sealant, RTV, or equivalent
• Construction adhesive suitable for the
roof
• 5/8" - diameter hole saw
• Augat IT1000 crimp/strip tool
(KVH P/N 19-0242)
• Eight 1/4" fasteners (optional, see
“Mount the Receiver” on page 10 )
• Fasteners suitable for mounting the
antenna to the roof
• RF modulator (if necessary, see “Wire
the Antenna” on page 7 )
d. Peel off the extra serial number label
(taped to the antenna) and affix it to the
appropriate box on red Activation Card
(see Figure 2 ).
Always lift the antenna by the
baseplate and never by the radome or
any portion of the internal antenna
assembly (see
Figure 1 ).
IMPORTANT!
Inspect Parts and Get Tools 1
Figure 1 TracVision R6ST Antenna
Figure 2 Activation Card
Antenna
Radome
Base
XXXXXXXXX XXXXXXXXX
Affix Serial
Number Here