Antenna Status Light on Additional Receiver(s)
Please note that the antenna status light on the additional
receiver(s) will remain red at all times.
This is normal.
Only the
original receiver that is connected directly to the antenna via the
RF coax cable can monitor antenna status.
Activating the Receiver(s)
Before you can start watching satellite TV via a TracVision
A5/M3 12V receiver, the receiver must be activated.
If you have already activated the original receiver:
Call KVH at
1-866-551-8004
to activate the second
(or third) receiver under the same account. Follow
the instructions on page v of the
User’s Guide
and
be sure to tell the KVH Activation Department
representative that you just need to add a second
(or third) receiver to your account.
If you need to activate the original receiver as well as the
additional receiver(s):
Call KVH at
1-866-551-8004
to activate all of your
receivers. Follow the instructions on page v of the
User’s Guide
and be sure to tell the KVH Activation
Department representative that you need to
activate multiple receivers.
Wiring Instructions for a Second or Third TracVision A5/M3 12V Receiver
54-0221 Rev. F
7
You will need the serial number of the additional
receiver(s) in order to activate. The serial number is noted
on the red Activation Card that came with the receiver.
Always Red
Second or Third Receiver
