Steps for Installing the RMT
1.
Remove the 4 screws from the top of the RMT.
2.
Remove the top plate of the RMT. Hold the top plate in the desired location of the
Stereo.
3.
Use the plate as a pattern to mark the 4 hole locations.
4.
Drill
inch holes completely through the top of the roof structure you are mounting
the RMT up to.
Tractor Tunes has provided 3 sizes of bolts in the bolt kit. Because this is a universal
RMT, You will need to determine the proper size for your application.
Always use the supplied sealing washers on the exterior of your top to provide a seal for
the bolts. Take your time to install this product. Installing it properly will ensure years of
listening enjoyment..
Warning!
Tractor Tunes will not warranty any installation of this product.
This is an aftermarket product and needs to be installed properly. Failing to drill
the correct size holes, over tightening and not using the provided sealing washers
will cause damage to the RMT and whatever you are bolting it to.
