Tractor Supply MS-P01-510A Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 22

background image

CAUTION!

You will now have a ﬁre in the Firepot.

Be careful not to burn yourself

when you

install these components. Gloves are recommended.
9. Turn the Switch ON (--) and the Temperature/Dial to any setting desired. With the Door
closed, let the Grill pre-heat for approximately 10 minutes before placing food in the Grill.

Control Shutdown cycle

The control for this barbecue comes with an automatic shut down cycle. When ﬁnished
cooking on your barbecue set the Temperature/Dial Knob to the ShutdownCycle position,
this will leave the Draft Induction Fan running for ten minutes to burn any excess pellets in the
ﬁre pot. After the fan runs for ten minutes the controller will power off and the fan and it will
stop running.

CAUTION!

The main power switch will shut the power off to the controller and

the Temperature/ Dial Knob switch will cut off power to the grill components only.
When servicing the controller or any parts ensure that the power supply is disconnected to
avoid a shock hazard.

Control Safety Features

The controller comes equipped with 2 safety features that will help you to keep the grill
operating correctly. The ﬁrst of these is a low temperature alarm. If the grill stays below 125
degrees as read by the RTD temperature sensing device for a period of 10 minutes the
control will go into an alarm state and the display will read"LEr".This will shut off all power to
the internal components of the grill. The display will stay in this state until you turn off the
main power switch The second safety feature will be a high temperature alarm. If the grill
obtains an internal temperature reading of 550 degrees as read by the RTD temperature
sensing device the control will go into alarm state and the display will read"HEr". This will
turn off all power to the internal components of the grill. The display will stay in this state unti
you turn off the main power switch. Whenever either of these alarm conditions occurs you
should check to see what caused this condition and ﬁx the problem. Call customer service
if you need help.

13

«
...
12
13
14
15
16
...
»

Содержание MS-P01-510A























Отзывы:

Нет отзывов

Похожие инструкции для MS-P01-510A

Бренд: Fein Страницы: 52

Бренд: Fein Страницы: 133

Бренд: Fein Страницы: 70

Бренд: Feider Machines Страницы: 12

Бренд: BIG JOHN Страницы: 15

Бренд: MR. Steak Страницы: 48

COMPETITOR RSH-014349

Бренд: MasterChef Страницы: 22

Braai Mate 1192-09

Бренд: Cadac Страницы: 8

Бренд: Euroboor Страницы: 23

Бренд: Kirkland Signature Страницы: 26

EvenHeat Series

Бренд: Coleman Страницы: 25

Бренд: Grandhall Страницы: 41

Бренд: Ryobi Страницы: 87

James Martin ZX833

Бренд: Wahl Страницы: 16

Бренд: EIBENSTOCK Страницы: 32

Бренд: La Hacienda Страницы: 5

Бренд: Bort Страницы: 41

Бренд: Ozito Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды