manualshive.com logo in svg

Traction Hobby THT6, Инструкция по эксплуатации

Поделиться
Скачать
Traction Hobby THT6 Скачать руководство пользователя страница 21

                               

 

   

www.tractionhobby.com

 

 

20 

 

3.16 Programmable Mixes "PMIX" 
Programmable mixes between arbitrary channels 

These functions allow you to apply mixing between the steering, throttle, CH3 and CH4,CH5,CH6. 

 
Setup items 

LEFT: Mixing rate (Left side) 
RGHT: Mixing rate (Right side) 
MST: Master channel 
SLV: Slave channel 
 
Programmable Mixes "PMIX" 
MXMD: Mix mode 
Enter the function menu and use“Dec(-)”or  “Inc(+)”  button to access PMIX function, then press 
“Enter”  button to get into PMIX function interface. 
 
(1) Master channel 
Channel selection (MST) 
ST, TH, CH3, CH4,CH5,CH6 
Initial value: ST 
 
Select setup item "MST" by pressing “Dec(-)”  or“Inc(+)”button, press“  Enter  ”  button, the initial 
master channel will blink. Use“  Dec(-)”or“  Inc(+)  ”  button to select the master channel you wish 
to adjust, press“Enter”  button, the blinking master channel you selected will stop blinking. 
 
(2) Slave channel 
Channel selection (SLV) 
ST, TH, CH3, CH4,CH5,CH6 
Initial value: ST 
 
Select setup item "SLV" by pressing “Dec(-)”  or “Inc(+)”  button, press “Enter”  button, the initial 
slave channel will blink. Use “Dec(-)” or “Inc(+)”button to select the slave channel you wish to adjust, 
press  “Enter”  button, the blinking slave channel you selected will stop blinking. 
 
(3) Left, forward or up side mixing amount adjustment 
Mixing amount 
-100~0~+100 
Select the setting item "LEFT", "FWRD", or "UP"(These setup items are different depend on the master 
channel. ST: "LEFT"; TH: "FWRD"; CH3:"UP") by pressing “Dec(-)”  or “Inc(+)”  button. Press “Enter” 
key, the initial value of "LEFT", "FWRD", or "UP"    will blink, Use “Dec(-)” or “Inc(+)” button to adjust 
the left, forward, or up side mixing amount. 
(Note: In the interface of adjusting the value, return to the initial value    "0"    by pressing“Dec(-)” and 

Содержание THT6



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды