manualshive.com logo in svg

Traction Hobby THT6, Инструкция по эксплуатации

Поделиться
Скачать
Traction Hobby THT6 Скачать руководство пользователя страница 19

                               

 

   

www.tractionhobby.com

 

 

18 

 

(1) Enter the function menu and use  “Dec(-)”or  “Inc(+)”  button to access SUBTR function. 
(2) Press  “Enter”  button to get into SUBTR function interface. 
(3) Use  “Dec(-)”  or  “Inc(+)”  button to select ST channel, press  “Enter”key, and the initial value 
of ST will blink. Use  “Dec(-)”  or  “Inc(+)”  button to adjust the center. 
(Note: In the interface of adjusting the value, return to the initial value "0" by pressing  “Dec(-)”  and 
“Inc(+)”  buttons simultaneously for about 1 second.) 
(4) Press  “Enter”  key, the adjusted value stops blinking, now the center of ST has been adjusted. 
(5) TH channel and CH3~CH6 can be set similarly. 
(6) When ending setting, return to the initial screen by pressing  “Exit”  button twice. 

 
3.13 Servo Reverse "REV" 
Servo operation reversing 

This function reverses the direction of operation of the servos related to transmitter steering, throttle, 
channel 3 , channel 4 ,channel 5 and channel 6 operation. 
Channel 
ST: Steering(CH1) 
TH: Throttle(CH2) 
CH3: Channel3(VR) 
CH4: Channel4(SWA) 
CH5: Channel5(SWC) 
CH6: Channel6(SWB) 
 
(1) Enter the function menu and use  “Dec(-)”  or“Inc(+)”  button to access REV function. 
(2) Press  “Enter”  button to get into REV function interface. 
(3) Use “Dec(-)”  or “Inc(+)”  button to select ST channel, press  “Enter”key, and the “NOR” will 
blink. 
(4) Press  “Enter”  key, the “NOR” stops blinking, Use  “Dec(-)”or“Inc(+)”button to reverse the 
ST servo operation direction. 
(5) TH channel, CH3~CH6 channel can be set similarly. 
(6) When ending setting, return to the initial screen by pressing  “Exit”  button twice. 

 
3.14 Steering Dual Rate/Throttle Dual Rate "D/R" 
Dual rate 

The steering left and right servo travels are adjusted 
simultaneously. When you want to increase the servo travel, 
adjust the + side. When you want to decrease the servo travel, 
adjust the - side. 
 

Setup Item 

Steering D/R 
Throttle D/R 

Содержание THT6



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды