![Tractel travflex ringflex Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/tractel/travflex-ringflex/travflex-ringflex_installation-operating-and-maintenance-manual_1147641016.webp)
GB
16
• For a Tractel
®
fall-prevention anchoring de-
vice to be used by an operator whose weight,
including equipment and tools, exceeds
150 kg.
• To use a Tractel
®
fall-prevention anchoring de-
vice with a load of between 100 kg and 150 kg
(total weight of the operator, equipment and
tools) if any component in the fall-arrest system
has a lower working load limit.
• To use a Tractel
®
fall-prevention anchoring
device if it has already arrested an operator’s
fall.
• To use a Tractel
®
fall-prevention anchoring de-
vice as an anchor point on load-lifting equip-
ment.
• To use a Tractel
®
fall-prevention anchoring de-
vice in a highly corrosive or explosive atmos
-
phere.
• To install Tractel
®
fall-prevention anchoring
devices on any host structure other than those
described in this manual.
• For a Tractel
®
fall-prevention anchoring device
to be used by someone who is not in good
physical condition.
• For a Tractel
®
fall-prevention anchoring device
to be used by a pregnant woman.
• To use a Tractel
®
fall-prevention anchoring de-
vice if the safety function of any of the associ
-
ated items is affected by the safety function of
another item or may interfere with it.
• To use a travsafe™ ringsafe anchoring device
if the fall indicator is broken
(fig.
1, lbl. 5)
.
• To use a Tractel
®
fall-prevention anchoring
device to secure an equipment / material
load.
• To attach to a Tractel
®
fall-prevention anchor-
ing device a fall-arrest system whose dynamic
load limit exceeds or is suspected to exceed
6 kN.
•
To perform any repair or maintenance oper
-
ations on a Tractel
®
fall-prevention anchoring
device without first having been trained and
qualified by Tractel
®
, with written proof.
• To install the travsafe™ PAS and/or travsafe™
ringsafe anchoring devices on a structure
whose mechanical breaking strength is, or is
suspected to be, lower than 12 kN.
• To install the travsafe™ PA, travsafe™ PO
and/or travflex™ ringflex anchoring devices on
a structure whose mechanical breaking strength
is, or is suspected to be, lower than 13 kN.
• To install a Tractel
®
fall-prevention anchoring
device in any way and on any host structure
other than those described in this manual.
• To use a Tractel
®
fall-prevention anchoring de-
vice outside the temperature range of -35°C to
+60°C.
• To use a Tractel
®
fall-prevention anchoring de-
vice if the space below it is incompatible with
the envisaged fall-arrest clearance and/or if
there is an obstacle in the fall trajectory.
• To use a Tractel
®
fall-prevention anchoring de-
vice if a rescue plan has not been put in place
beforehand for in the event that one or more
operators sustains a fall.
• To install a Tractel
®
fall-prevention anchoring
device below the level on which the operator
moves around.
• To install a Tractel
®
fall-prevention anchoring
device using attachments that do not meet
the specifications of this manual in terms of
their strength, diameter, number or tightening
torque.
• For someone to connect to a Tractel
®
fall-pre-
vention anchoring device via any means other
than a fall-arrest system.
7. Associated equipment
Fall-arrester system (EN 363):
• An anchoring device (EN 795).
• An end connector (EN 362).
•
A fall-arrest system (EN 360).
• A connector (EN 362).
• A fall-arrest harness (EN 361).
8. Maintenance and storage
If a Tractel
®
fall-prevention anchoring device is
dirty, it can be washed with clear, cold water us
-
ing a mild detergent for fabrics, and a synthetic
brush.
Before transport and storage, wrap the equip-
ment in packaging that will keep out moisture
and protect against any damage (direct heat
sources, chemicals, UV, etc.).