15
Connect the Power/Data Cable
Connect the power/data cable to the “Power/
Data” jack on the bottom of the antenna (see
Figure 21 on page 14). Hand-tighten until the
connector locks in place; do not use excessive
force.
Protect the Cables
a.
Secure the cables near the antenna connectors
to relieve stress (see Figure 22).
b.
Weatherproof and seal the cable access hole,
as required.
S
tr
a
in-relief
Figure 22: Strain-relief Example
The integrity and reliability of the RF cables
and their connections are critically important.
Make certain that these cables are properly
terminated, sealed against seawater and
corrosion, strain-relieved, protected from
abrasion, and free of stress.
IMPORTANT!
Continued
Wire the Antenna
8
